All orders are bring processed as usual and at this point in time, no delays are expected with product deliveries.
We will update this message if this status changes.
|Worldwide shipping available|
|Pay via Credit/Debit Card, PayPal or bank transfer online. PO number can be added during checkout if required.|
About the replacement sensor for eutech elite ph spear
Elite pH Spear Replacement Sensor
This is a replacement sensor module for the Elite pH Spear tester. It is very easy to replace the sensor on your Elite pH Spear once it shows signs of calibration failure or fluctuating readings. No need to buy a whole new tester, just purchase a sensor at a much lower cost.
Replacing a sensor
- Ensure you have dry hands.
- Hold onto the ring with the pH spear sensor facing you. Twist the ring clockwise. Set the ring aside for later.
- Remove the old sensor module from the tester by gently pulling it away.
- Match the four slots on the tester with the four tabs on the new sensor module and gently push the module into the slots.
- Push the smaller O-ring fully onto the new sensor module. Push the other O-ring over the module and thread it into place by firmly twisting counter clockwise.
- Your tester will now require calibration before use. You will have received a full instruction booklet with your tester that you can consult if need be.
Eutech PC 450 Meter Kit : pH, ORP, Cond, TDS, Salinity, Temp
Tests for pH / mV / Conductivity / Total Dissolved Solids / Salinity / Temperature. Top of the range multi parameter device - waterproof...
Model : RMS0001033, ECPCWP45004K
PC 2700 Bench Meter Kit : pH, TDS, ORP, ION, Cond, Salinity
Research multi parameter (8 parameters) testing device and kit. Laboratory bench meter with password protection, easy data transfer to...
Model : RMS000745, ECPC270043S